Details

• Brand:

  

  

• SKU:

  JL3Z-2C150-B

• Positions: Rear, Left, Right
• Description:

  Ford catalogs this part as Bolt and describes it as a kit including guide pins, boots and bolts for the rear brake calipers on F-150 trucks built with the power operated electric parking brake. It is filed in the Rear Brake Discs and Calipers group as reference 2C150 and is listed for both the left and right rear corners, with police duty trucks calling for the medium electric parking brake application. Ford rear brakes on this truck use a floating caliper: the caliper body slides on two lubricated guide pins threaded into the caliper bracket, letting the housing center itself so both pads clamp the rotor evenly. The rubber boots keep water and road salt off the pin shanks and hold lubricant in place. When a boot splits, the pin corrodes or seizes and the caliper can no longer float, which shows up as uneven inner to outer pad wear, a pull to one side under braking, a hot wheel or dragging brake after a stop, a rear rotor glazed or scored on one face only, and sometimes a clunk from the rear under light braking. Renewing worn pins and boots at every rear pad service is standard practice on electric parking brake trucks. This number supersedes FL3Z-2C150-A and JL3Z-2C150-A, is supplied with a new caliper support, and covers 2015 through 2026 F-150 applications. Lubricate the pins with high temperature silicone caliper grease and place the electronic parking brake actuator in service mode before disassembly.

• Notes: Included with caliper support.
• Replaces:

  BKCF35, FL3Z2C150A, JL3Z2C150A

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov