Details

• Brand:

  

  

• SKU:

  G1FZ-5A968-A

• Positions: Rear Right Right, Right
• Other Names:

  Knuckle, Knuckle And Hub Assembly

• Description:

  This genuine Ford rear suspension knuckle serves the right-hand side of the 2016 through 2018 Focus RS all-wheel-drive platform equipped with the 2.3L EcoBoost engine. The knuckle is the structural cast upright that carries the rear wheel bearing and hub, locates the lower control arm, toe link and trailing arm mounting points, and provides the mounting face for the rear brake caliper and the ABS wheel speed sensor. Because it establishes rear wheel camber and toe geometry, a bent, cracked or corroded knuckle produces uneven rear tire wear, a pull or dog-tracking sensation, clunking over bumps, and alignment readings that cannot be brought back into specification. Buyers typically need this part after collision damage, curb or pothole impact, or when a seized wheel bearing has damaged the hub bore. This assembly is cataloged by Ford as the rear right suspension knuckle for AWD Focus applications and matches factory geometry so the vehicle can be returned to specification after installation. Because the rear hub retaining hardware and certain suspension fasteners on this platform are torque-to-yield single-use items, always replace those fasteners with new ones and torque to Ford specification rather than reusing the originals. A four-wheel alignment is required after replacement to restore correct rear toe and camber.

• Notes: Part has related components that cannot be reused/reinstalled. bolt.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov