Details

• Brand:

  

  

• SKU:

  F2GZ-8A080-B

• Other Names:

  Reservoir, Expansion Tank, Reservoir Tank, Tank Assembly Radiator Overflow

• Description:

  This is the genuine Ford engine coolant reservoir, cataloged as the radiator overflow or expansion tank, for the 2016-2024 Ford Edge with the 2.0L engine. The reservoir is the molded plastic tank that manages the cooling system's expansion volume, accepting coolant as it heats and expands and feeding it back as the engine cools so the system stays full and free of trapped air, while the fill neck and cap provide the service point for checking and topping off coolant. The tank body carries the minimum and maximum level marks that let a buyer judge coolant level and condition at a glance. Drivers need this part when the tank cracks, splits at a molded seam, or grows brittle from years of heat cycling and begins to seep coolant, or when the neck and cap sealing surfaces are worn so the system cannot hold pressure. Typical symptoms are a sweet coolant odor, recurring low-coolant messages, green or orange residue and drips under the front of the car, and gradual overheating. Fitting the genuine Ford reservoir guarantees the correct capacity, hose port arrangement, cap seal, and pressure rating that the 2.0L cooling system was designed around, avoiding the fitment and sealing problems common with substitute tanks. After installation, refill with the specified Ford coolant, bleed the cooling system following the proper procedure, and verify there are no leaks once the engine reaches operating temperature. Confirm the 2.0L engine and your VIN before ordering, since the earlier and multi-engine application of this reservoir uses a different suffix.

• Applications: 2.0L.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov