Details

• Brand:

  

  

• SKU:

  PW-574

• Other Names:

  Motorcraft™ Water Pump, Pump Assembly Water

• Description:

  This genuine Ford Motorcraft engine water pump fits the second-generation 3.5L EcoBoost V6 in the 2017 F-150, and it corresponds to Ford part number HL3Z-8501-A. The belt-driven pump circulates coolant through the twin-turbocharged engine's block, cylinder heads, and radiator to hold operating temperature during boost and towing. It ships as a complete assembly. Owners typically look for this pump after noticing coolant seepage or dripping from the weep hole, a bearing whine or growl from the front of the engine, coolant residue on the front cover, overheating under load, or a recurring low-coolant warning. A pump with a worn bearing or a failed shaft seal cannot be resealed and should be replaced as a unit. Install any supplied sealing gaskets clean and dry unless Ford specifies sealant, torque the fasteners in the correct sequence, refill with the correct Ford specification coolant, and bleed the cooling system carefully to avoid an air pocket that can trigger a false overheat on this EcoBoost engine. Inspect the drive belt, tensioner, and thermostat while access is open. This Motorcraft assembly is a direct-fit replacement engineered to the original coolant-flow specification for reliable temperature control and long service life.

• Notes: Includes Water Pump Gaskets.
• Applications: 3.5L.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov