Details

• Brand:

  

  

• SKU:

  HL3Z-6079-D

• Other Names:

  Valve Grind Gasket Kit, Kit Gasket

• Description:

  This genuine Ford engine cylinder head gasket set, also cataloged as a valve grind gasket kit, supplies the gaskets, seals, and O-rings needed to reseal the top end of the 3.5L EcoBoost twin-turbo V6 used in the 2017 through 2020 F-150. The kit is used whenever the cylinder heads are removed for a valve job, head gasket replacement, or turbo and manifold service, restoring a leak-free seal between the heads, intake, exhaust, and valve covers. Buyers reaching for this kit are typically addressing coolant or oil seepage at the head-to-block joint, white exhaust smoke, coolant loss without an external leak, rough running from a compression leak between cylinders, or a documented head gasket failure. Using fresh factory gaskets is essential because the originals take a permanent set once torqued and cannot be reused after the heads come off. This is an OEM upper-engine gasket package matched to the 3.5L EcoBoost; the head bolts are separate torque-to-yield fasteners that must also be replaced and must never be reused. Confirm your engine is the 3.5L EcoBoost before ordering, follow the Ford torque sequence and angle specifications, and replace related coolant and oil as required during reassembly.

• Applications: 3.5L.
• Replaces:

  hl3z6079a, hl3z6079b, hl3z6079c

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov