Details

• Brand:

  

  

• SKU:

  HG9Z-7R081-B

• Other Names:

  Cooler Pipe, Tube Assembly

• Description:

  This genuine Ford tube assembly is the automatic transmission oil cooler line for the 2017 through 2020 Ford Fusion equipped with the 1.5L engine and automatic transmission. Ford lists it under base number 7R081 as an Automatic Transmission Oil Cooler Hose Tube and it carries fluid between the transaxle and the cooler so transmission oil stays within its proper operating temperature. The assembly combines rigid formed metal tube sections with connecting hose and factory quick connect fittings shaped to follow the exact routing of the application. Transmission cooler lines fail when the rubber sections harden and crack the crimped joints seep or the metal tube corrodes which leads to visible red fluid leaks a low fluid level slipping or harsh shifts and in severe cases overheating that can damage the transmission. Because a leak here drains transmission fluid rather than coolant it is important to repair it promptly with the correct part. The genuine Ford tube restores exact fit at every connection and the proper fluid seal that generic lines often miss on this platform. Confirm the 1.5L automatic application before installing then clean the fittings inspect the sealing rings and replace them if worn and seat each quick connect fully until it locks. Refill and check the transmission fluid to the Ford specification after installation and inspect for leaks at operating temperature to complete a reliable repair.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov