Details

• Brand:

  

  

• SKU:

  DT1Z-13K371-A

• Positions: Left, Right, Front
• Other Names:

  Signal Lamp Bulb Holder, Turn Signal Light Socket, Parking Light Bulb Socket, Marker Lamp Bulb Socket, Side Marker Light Bracket, Socket Assembly Flasher Lamp

• Description:

  This is the genuine Ford turn signal bulb socket assembly that mounts into the halogen rear combination lamp of the Transit Connect, holding the signal bulb and carrying the electrical feed to it through an integral pigtail connector. It secures the bulb, maintains a corrosion-free contact, and seals the bulb opening against moisture so the tail and turn functions operate reliably. Owners typically replace this socket when a turn signal or tail bulb flickers, works intermittently, or refuses to illuminate even after a known-good bulb is installed, which usually points to melted, discolored, or corroded contacts inside the socket rather than the bulb itself. A cracked socket body or a socket that will no longer lock the bulb in place produces the same symptoms. The Ford catalog name is Socket Assembly Flasher Lamp, and it is the correct service part for halogen-equipped rear lamps. Inspect the mating bulb and the lamp housing contacts while the socket is out, and route the pigtail so the connector seats fully to restore a weathertight, positive electrical connection.

• Notes: Included with headlamp assembly.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov