Details

• Brand:

  

  

• SKU:

  KU2Z-2V200-A

• Other Names:

  Disc Brake Pad Set, BRSD2018A

• Description:

  This is a genuine Ford rear disc brake pad set carrying the Motorcraft BRSD2018A designation, supplied with the integral clip hardware required for installation. The set fits 17-22 F-550 Super Duty chassis builds across the medium-duty cab and chassis range, including dual rear wheel and pickup configurations sharing the same rear caliper package. Drivers typically reach for this part when noise, judder, or low pedal indicates worn rear friction, when a service inspection shows the pads at minimum thickness, or when a rebuild of the rear caliper requires fresh friction in the new bracket. Ford engineers the friction formulation to handle the high payload duty cycle of the F-550 chassis cab, balancing stopping torque, pad wear life, and rotor compatibility for fleet, tow, and upfit duty without the dust and noise characteristics that show up with cheaper non-OEM compounds. Always replace rear pads as an axle set, never one side at a time, and inspect the rear rotors for scoring, thickness variation, and runout while the caliper is off. Brake hardware including the anti-rattle clips that ship with this set must be installed fresh to keep the pads square in the abutment and prevent edge taper, since reusing fatigued clips leads to early complaints and uneven pad wear. Clean the caliper guide pins and re-grease with high-temperature caliper lubricant before reassembly, torque the caliper bracket bolts to specification, and perform a Ford-standard bed-in procedure before returning the vehicle to service to seat the friction material and stabilize the new pad-to-rotor interface for the long haul.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov