Details

• Brand:

  

  

• SKU:

  JL1Z-9054-G

• Positions: Rear
• Other Names:

  Strap Assembly Fuel Tank

• Description:

  This is a genuine Ford fuel tank retention strap designed for the 18-19 Ford Expedition equipped with the 3.5L EcoBoost V6. It is the second strap in the pair used on this application and supersedes earlier revision JL1Z-9054-C. The strap supports the fuel tank against the underbody, working in conjunction with the front strap to hold tank position under all driving loads. Each strap on the assembly carries its own part number because the front and rear positions have different lengths, mounting angles, and isolator details specific to the tank profile and chassis crossmember spacing. Using the correct strap for the position is essential, since substituting one strap for the other will produce misalignment or insufficient retention force. The coating on a genuine strap is calibrated for long-term corrosion resistance against road salt and underbody moisture, and reproductions often use thinner or less durable plating. Replacement is typically performed with the fuel tank lowered slightly on a transmission jack to relieve strap tension before bolts are loosened, and the fuel filler line, vapor lines, and electrical connections should be inspected during the procedure. Tighten to factory specification when reassembling, and replace any rubber isolators or anti-squeak pads that show compression set or cracking. Confirm engine option and model year before ordering, since the 5.0L V8 variant of this generation Expedition uses different tank and strap geometry. This listing covers the individual strap only, without fasteners or isolators unless explicitly noted.

• Replaces:

  JL1Z9054C

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov