Details

• Brand:

  

  

• SKU:

  JL3Z-13404-JCP

• Description:

  This is a genuine Ford passenger-side tail light assembly for the 18-20 F-150 XL and XLT trims equipped with halogen tail lights without the blind spot rear (BSR) lighting option. The assembly contains the brake light, tail light, turn signal, reverse light, and side marker functions in a single housing that mounts to the rear pickup box panel and connects to the chassis harness through a keyed connector. The XL and XLT halogen tail light differs from higher-trim LED assemblies in both bulb sourcing and connector pinout, so confirming the donor truck's original tail light specification is essential. A damaged tail light is a safety and legal issue: a cracked lens that admits moisture will eventually corrode bulb sockets and produce intermittent failure of the rear lighting functions, and a non-functioning brake or turn signal can produce a citation or contribute to a rear-end collision. Replacement is typically a two-bolt procedure with one electrical connector, requiring careful removal of any retention clips on the inboard edge to avoid breaking the housing. After installation, verify all lighting functions including brake, tail, turn signal, reverse, and any side marker, and inspect the housing seal for proper seating against the body so that water cannot intrude past the gasket. Inspect the harness connector for corrosion or pin damage during replacement and apply dielectric grease to the new connection to prevent future moisture intrusion. Bulbs are not included with this listing.

• Replaces:

  JL3Z13404HCP

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov