Details

• Brand:

  

  

• SKU:

  JL1Z-17E810-APTM

• Positions: Front Left Inner, Left Inner
• Other Names:

  Cover

• Description:

  This is a genuine Ford OEM front bumper cover molding for the driver side inner position of 18-21 Expedition trucks, supplied in paint-to-match raw finish. The molding occupies the inner LH portion of the front bumper cover and provides the finished trim surface visible inboard of the headlight and outboard of the grille. Because the molding is supplied unprimed and unpainted, it must be primed and color matched to the host vehicle before installation. Installing this OEM molding returns the bumper cover assembly to factory appearance after collision repair or scuff damage and supports correct gap and flush against the grille and headlight. The part is molded to original Ford dimension and accepts standard automotive primer and base coat without surface preparation issues. It is the inner LH variant only and is not interchangeable with the RH JL1Z-17E811 molding or with the outer LH pieces. This genuine part is backed by the Ford and Motorcraft Parts Limited Warranty. Use the published refinish procedure to prime, color match, and clear coat the molding before installation, and verify gap and flush against the adjacent grille and headlight after final assembly.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov