Details

• Brand:

  

  

• SKU:

  JL1Z-18472-C

• Other Names:

  HVAC Heater Hose, Hose Heater Water, kh1188

• Description:

  This genuine Ford OEM HVAC heater water outlet hose pairs with the JL1Z-18472-B inlet hose and serves the 18-21 Expedition and 18-22 Lincoln Navigator with the 3.5L V6 engine. The hose carries cooled coolant back from the heater core return tap to the engine cooling circuit and completes the primary HVAC supply loop. Installing both the inlet and outlet hoses as a matched pair is recommended when either hose has failed, since the two hoses age together under the same temperature and pressure cycles and the un-replaced side often fails shortly after the first. The hose is molded to the original Ford routing to clear engine and accessory components without strain or chafing and uses the correct coolant-rated material for long service life. non-OEM hoses in this fitment commonly use looser tolerance moldings that allow chafing against the brake booster or accessory drive. This OEM hose avoids that failure mode by reproducing the factory routing exactly. This genuine part is backed by the Ford and Motorcraft Parts Limited Warranty. After installation, refill and bleed the cooling system per the published service procedure.

• Replaces:

  jl1z18472ba, kh913

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov