Details

• Brand:

  

  

• SKU:

  JR3Z-8475-G

• Other Names:

  Shutter Assembly Radiator Control

• Description:

  This is the genuine Ford radiator control shutter assembly, also known as the active grille shutter, for the Mustang. Ford catalogs it as Shutter Assembly - Radiator Control, and it fits 2018 through 2023 Mustang models with either the 2.3L EcoBoost four-cylinder or the 5.0L V8. The unit is a motorized array of louvered slats mounted behind the grille opening; the powertrain control module opens and closes the slats based on coolant temperature, intake air temperature, vehicle speed, and load to balance aerodynamic drag against cooling airflow, which speeds engine warm-up and improves fuel economy. Failure symptoms include stored grille-shutter or actuator codes, an illuminated warning, slats stuck open or closed, higher-than-normal coolant temperatures, or a clicking noise from the failed motor. This complete genuine Ford assembly includes the frame, slats, integrated actuator, and connector and supersedes several earlier part numbers, so it reflects the latest revision. After installation the shutter requires calibration with Ford diagnostic equipment so the control module learns the open and closed end-stop positions before normal operation resumes.

• Notes: Included with shutter.
• Replaces:

  jr3z10884a, jr3z10884b, jr3z8475c

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov