Details

• Brand:

  

  

• SKU:

  W717823-S300

• Positions: Left, Right
• Other Names:

  Rivet

• Description:

  This is a genuine Ford fender liner retainer, a push-type rivet fastener used to secure the inner fender liner on the Mustang. The retainer passes through aligned holes in the fender liner and the surrounding sheet metal or structure, locking the liner in place so it stays tight against the body and shields the wheel well from road spray, debris, and noise. These rivets are a wear item that often break, lose their locking tension, or are damaged during removal, leaving the liner loose, sagging, or flapping at speed. Owners typically need this retainer when reinstalling a fender liner after suspension or body work, when replacing a liner, or when chasing a rattle or wind-noise complaint traced to a loose liner edge. Because the rivet is a one-piece locking fastener, a fresh one is used whenever the liner is reseated to guarantee a secure, tight fit. Built to Ford specifications, it matches the original head diameter, body size, and locking style to seat correctly in the factory hole without modification. Inspect the liner mounting holes and surrounding clips while the liner is off, then press the new retainer fully home until it locks. Using the correct genuine retainer keeps the fender liner properly positioned and quiet, protecting the wheel well and bodywork behind it.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov