Details

• Brand:

  

  

• SKU:

  JT4Z-6584-E

• Positions: Left, Lower Inner, Lower Outer, Left Inner, Left Outer, Right Inner, Right Outer
• Other Names:

  Valve Cover Seal, Gasket

• Description:

  This is a genuine Ford valve cover gasket, catalogued under base number 6584, fitted to the 2.7L and 3.0L V6 engines used across several Ford and Lincoln applications. The gasket seals the joint between the valve cover and the cylinder head, sealing the perimeter of the cover and each cover bolt path so engine oil stays inside the valvetrain area and does not leak onto the engine or into the spark plug wells. Owners replace this gasket when the original is hardened, cracked, compressed, or leaking, producing oil seepage along the head, a burning-oil smell, or oil migrating into the ignition coil bores and causing misfires. Because the gasket conforms to the cover and head sealing faces, Ford supplies it as a molded service gasket to restore the factory seal whenever the valve cover is removed or a leak appears. The 6584 valve cover gasket base covers the sealing positions for these engines, with the specific gasket matched to the cylinder bank and engine, so the correct application should be confirmed. Built to Ford specifications, this gasket matches the original sealing profile and bolt-hole pattern for a direct fit without modification. Fitment covers 2.7L and 3.0L V6 applications across the 18-24 span. Confirm the engine, cylinder bank, and your existing part number against the Ford catalog before ordering, and clean the sealing surfaces and follow the published torque sequence when reinstalling the valve cover.

• Notes: Included with valve cover.
• Applications: 2.7L. 3.0L.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov