Details

• Brand:

  

  

• SKU:

  JT4Z-9E464-B

• Other Names:

  Egr Pipe Gasket, Egr Valve Gasket, Valve Gasket, Inlet Pipe Gasket, Gasket

• Description:

  This is a genuine Ford EGR pipe gasket, catalogued under base number 9E464, used in the exhaust gas recirculation system on the 2.7L EcoBoost engine across several Ford and Lincoln applications. The gasket seals the joint where the EGR pipe connects within the recirculation circuit, such as at the exhaust manifold connection, sealing the joint so hot recirculated exhaust gas flows through the EGR path without leaking. Because the EGR circuit carries hot exhaust gas under pressure, this gasket must withstand heat and pressure cycling while keeping the joint tight. Technicians replace this gasket whenever the EGR pipe or related components are removed, or when an exhaust leak or EGR fault is traced to the pipe joint, since a deteriorated gasket can cause exhaust leakage, ticking noise, rough running, or EGR-related codes. Ford supplies it as a service gasket to restore the factory seal, and it should be installed clean with the joint correctly torqued. The 9E464 EGR pipe gasket base covers the sealing positions in this circuit, with this gasket matched to its specific joint. Built to Ford specifications, it matches the original sealing profile and bolt pattern for a direct fit without modification. Fitment covers 2.7L EcoBoost applications across the 18-25 span. Confirm the engine and existing part number against the Ford catalog before ordering, and replace this gasket whenever the EGR pipe joint is opened to ensure a reliable seal.

• Notes: Included with EGR pipe. Included with EGR tube. Included with EGR valve.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov