Details

• Brand:

  

  

• SKU:

  JX6Z-9229-A

• Positions: Lower
• Other Names:

  Injector O-Ring, Kit O Ring, cm5295

• Description:

  This is a genuine Ford fuel injector O-ring kit, catalogued under base number 9229, used to seal the fuel injectors on 5.0L V8 and related applications across several Ford and Lincoln models. The kit supplies the O-ring seals that fit each fuel injector, sealing each injector at its bore and fuel-rail interface so pressurized fuel stays contained and the injector seats correctly without leaking. These seals are essential for a clean, leak-free fuel-injection joint and for proper injector sealing under fuel pressure. Technicians use this kit when servicing or replacing fuel injectors, when an injector develops a fuel leak at its seal, or when the original O-rings are hardened, swollen, or cracked, since deteriorated seals can cause fuel odor, hard starting, misfires, or fuel seepage at the rail. Ford supplies the seals together as a kit so the injector sealing surfaces are renewed to factory standard during service. Despite occasional mislabeling as an air-cleaner component, this part is specifically the fuel injector sealing kit. Built to Ford specifications, the O-rings match the original size and cross-section for a direct fit without modification. Fitment covers 5.0L V8 applications and related engines across the 18-25 span, including F-150 and Mustang along with other models that share the injector seal design. Confirm the engine and existing part number against the Ford catalog before ordering, and install fresh seals lubricated and correctly seated whenever the injectors are serviced.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov