Details

• Brand:

  

  

• SKU:

  JT4Z-9J460-A

• Other Names:

  Pressure Sensor, Exhaust Gas Re-Circulation (Egr) Pressure Sensor, Pressure Feedback Sensor, Sensor Assembly, dpfe34

• Description:

  This is a genuine Ford EGR valve position sensor for the 2.7L EcoBoost engine family, fitting 18-25 Bronco, F-150, and Ranger, along with Corsair, Nautilus, and Navigator equipped with the same 2.7L EB application. Dealer catalogs document this sensor as part of the EGR pipe, tube, and cooler assembly hardware, and many supersession notes indicate it is included when those larger assemblies are replaced. The sensor reports valve position feedback to the powertrain control module so the closed-loop EGR strategy can stay within calibration during high-load EcoBoost operation. A failing sensor often shows up as a P0405-series code or an intermittent check engine light with no obvious drivability symptom. Because the connector geometry and pin mapping changed between EGR generations, verifying VIN-level fitment before installation prevents miscalibration. Manufactured to Ford OEM tolerances, this sensor meets the same temperature, vibration, and EMI specifications as the original component installed at the factory. Use of an OEM-grade sensor preserves the integrity of the EGR feedback loop, which is essential for emissions compliance and for protecting downstream catalyst hardware over the life of the vehicle.

• Notes: Included with EGR pipe. Included with EGR tube. Included with EGR cooler.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov