Details

• Brand:

  

  

• SKU:

  ML3Z-2C204-L

• Positions: Front, Left Front, Right Front
• Other Names:

  Front Speed Sensor, Sensor Assembly

• Description:

  This Genuine Ford ML3Z-2C204-L is the front ABS wheel speed sensor with integrated wire harness for 18-25 Expedition, F-150 built from 07/22/2021 without Police, Tremor, or Performance packages in either 4WD or RWD configuration, and Navigator. It supersedes earlier ML3Z-2C204-C on revised builds. The sensor reads the encoder tone ring at the front hub and feeds wheel speed data to the ABS/stability control module so the system can manage anti-lock braking, traction control, AdvanceTrac stability intervention, and hill-descent control. The wiring pigtail is sized for the F-150 chassis run with the OEM clips and grommet for routing through the wheel-arch liner. Drivers replace this part when the ABS warning light comes on with stored DTCs against a specific wheel sensor, when stability control disables intermittently in cold weather as the harness develops a chafe-through, when the speedometer drops to zero at parking-lot speeds, or when a debris strike damages the sensor body. Both sides should be inspected when one fails since age-related insulation fatigue typically affects the pair. After install the ABS module needs no programming, but a brief drive cycle is required for the stored DTC to self-clear.

• Notes: Included with hub and bearing.
• Replaces:

  ML3Z2C204C

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov