Details

• Brand:

  

  

• SKU:

  W719427-S439

• Positions: Left, Right
• Other Names:

  Suspension Stabilizer Bar Bracket Bolt, Bolt

• Description:

  This is a genuine Ford stabilizer bar bracket bolt, catalogued in the front suspension stabilizer bar group for the Ranger across the 19-23 window and referenced in Ford service literature for the front sway bar mounting. It is the threaded fastener that secures the stabilizer bar bracket or bushing clamp to the frame or crossmember, holding the bar firmly so it can resist body roll without the mount shifting. Because the stabilizer bar reacts cornering loads, a clean, correctly torqued bracket bolt is important to keeping the bar located; a loose bolt allows the bracket to move, which produces a clunk over bumps and degrades handling. Owners replace this bolt during stabilizer bar, bushing, or front suspension service, when the original has corroded or stripped, or when a front-end clunk has been traced to a loose sway bar bracket. It is commonly renewed together with the bushings and bracket so the mount clamps evenly on both sides. Manufactured to Ford specifications, it matches the original thread size and head so it threads into the host structure and installs in the original location without modification. Always confirm the threaded boss is clean and the bracket hole is undistorted before installation, and torque to the value given in the applicable front suspension service section, tightening at normal ride height where required. Inspect the stabilizer bar bushings and bracket for wear or cracking while the bolt is out, since worn bushings will clunk even with the bolt correctly torqued.

• Notes: Part cannot be reused/reinstalled.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov