Details

• Brand:

  

  

• SKU:

  KT4Z-58406A10-A

• Positions: Left
• Other Names:

  Support Cylinder, Lift Assembly Gas

• Description:

  This is the genuine Ford liftgate lift support cylinder for the 2019-2024 Ford Edge equipped with the power liftgate, the gas-charged support cylinder that raises, holds, and controls the liftgate through its travel. Ford catalogs it as a support cylinder for the power lift gate; it works with the power liftgate actuator and pinch sensors to open and close the gate smoothly and to hold it in the raised position. A failing support shows up as a liftgate that drifts or drops on its own, opens slowly or unevenly, will not stay up, makes clunking or hissing noises, or sets power liftgate faults. Because the left and right supports work as a matched pair, replacing both sides at the same time is recommended so travel speed and holding force stay balanced. Confirm your vehicle has the power liftgate before ordering, since power and manual liftgate supports differ. Ford references show side and position assignment can vary for this base, so verify the mounting orientation against the original before fitting. Support the liftgate before removing the old cylinder, disconnect the ball-stud sockets carefully, and transfer the gate to the new support without straining the wiring or pinch-sensor harness. Correct installation restores controlled, powered operation of the rear gate and stops unwanted drift or drop.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov