Details

• Brand:

  

  

• SKU:

  K2GZ-7086-A

• Positions: Front
• Other Names:

  Center Shaft Seal, Axle Seals, Seal Dust

• Description:

  This is a genuine Ford transfer case dust seal for 19-25 Edge, Escape, Maverick, plus Corsair and Nautilus applications. Dealer catalog references describe this part as the dust seal at the transfer case interface, sometimes referred to in catalogs as a transfer case seal. The seal prevents road grit, water, and contamination from entering the transfer case at the rotating shaft interface, protecting the internal bearings and dynamic seals from premature wear. Failure modes include cracking of the rubber outer ring after long term heat and chemical exposure, and physical damage during a transfer case removal that was performed without removing the seal first. Replacement is straightforward once the transfer case is accessible, but care must be taken to install the seal squarely without distorting the outer metal frame. Always lubricate the seal lip with the specified Ford grease before installation, and inspect the mating shaft surface for nicks or burrs that could cut the new seal.

• Notes: Included with inner shaft. Included with center shaft.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov