Details

• Brand:

  

  

• SKU:

  W712349-S307

• Positions: Left Lower, Left Front, Left Upper, Right Lower, Right Front, Right Upper, Upper Lower, Upper Front, Upper
• Other Names:

  Bumper Face Bar Mount Nut, Upper Bracket Nut, Bumper Face Bar Nut, Spoiler Nut, Support Bracket Nut, Trailer Hitch Nut, Front Bumper Retainer Nut, Nut Spring

• Description:

  This is the genuine Ford spring nut that retains the bumper mount plate on late model F-150 and Ranger trucks, catalogued as Mount Plate Nut and also listed as Nut - Spring or bumper face bar mount nut. It is a captive style fastener that clips into the mounting plate and provides the threaded anchor the bumper face bar bolts pull against, and it is used at the left and right upper, lower and front mounting positions on the bumper structure. Because the bumper mount carries real load, especially on trucks fitted with step bars, tow hooks or a winch plate, the fastener that anchors it has to hold torque without spinning or pulling through the sheet metal. Buyers need this nut after collision repair when the original is deformed or lost, after corrosion seizes the threads and the nut spins in its cage during disassembly, or after a bumper removal for grille, radiator or crash bar service leaves a cracked or missing clip behind. The symptoms of a failed one are a bumper corner that will not draw tight, a bolt that turns forever without clamping, and a bumper that shifts, creaks or rattles because one mounting point is no longer loaded. Replace it with the genuine Ford fastener so the thread form, spring tension and plating match the original, seat the clip fully onto the plate flange before starting the bolt, and torque the bumper bolts to specification.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov