Details

• Brand:

  

  

• SKU:

  LC3Z-6881-A

• Other Names:

  Adapter, Adapter Oil Filter

• Description:

  This Genuine Ford engine oil filter adapter is the machined housing that mounts the engine oil filter and routes oil between the filter, cooler, and engine oil galleries on 2020 through 2022 Ford F-250 and F-350 Super Duty trucks with the 6.7L Power Stroke turbo-diesel V8 or the 7.3L gas V8. It positions and seals the filter and its oil passages, and on the diesel it integrates with the oil-cooler circuit so filtered oil reaches the bearings and other engine loads at the correct pressure. When the adapter gaskets or O-rings harden and fail, or the housing cracks, the result is an external oil leak near the filter, oil pooling on the crossmember or skid plate, a dropping oil level, and possible pressure loss. Buyers searching for this part are typically tracing a persistent oil leak at the filter mount that a fresh filter alone does not cure, or replacing an adapter damaged during service. As the factory OEM component it matches the original bore, thread, and sealing surfaces so it mates correctly with the filter and cooler lines without leaks. Replace the associated gaskets and seals with new items during installation, clean the mating surfaces thoroughly, and torque the fasteners to the Ford specification to ensure a leak-free seal. Refill with the correct grade and capacity of engine oil and verify oil pressure after startup before returning the truck to service.

• Replaces:

  bc3z6881a, bc3z6881c

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov