Details

• Brand:

  

  

• SKU:

  LC3Z-7A008-E

• Other Names:

  Plate

• Description:

  This Genuine Ford transmission valve body separator plate fits 20-22 F-250 and F-350 Super Duty trucks with the 10R140 ten-speed automatic transmission. The separator plate sits between the upper and lower halves of the valve body and controls fluid routing through precisely sized orifices and check ball seats that establish shift timing, line pressure, and clutch apply rates. Each calibration generation uses a specific plate; substituting the wrong plate can cause incorrect shift feel, slipping, harsh engagement, or trouble codes. This Genuine Ford plate is laser-cut to factory specification, cleaned to assembly standards, and shipped flat in protective packaging. When servicing the valve body, replace all separator plate gaskets, inspect every check ball for wear or damage, and confirm proper bolt torque using a calibrated wrench, working in the published sequence to avoid distortion. After installation, perform the transmission adaptive learning relearn procedure using a scan tool, then drive the truck through the full gear range under varied throttle to allow the powertrain control module to fully relearn shift adapts.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov