Details

• Brand:

  

  

• SKU:

  L1MZ-19712-B

• Other Names:

  yf751

• Description:

  This is a genuine Ford air conditioning condenser assembly with integrated receiver-drier, supersedes the earlier L1MZ-19712-A in the same family. It fits 20-23 Explorer, 20-23 Aviator, and 20-23 Police Interceptor Utility across the full powertrain lineup including the 2.3L EcoBoost, 3.0L EcoBoost, 3.3L flex-fuel V6, and 3.3L full hybrid EV-gas variants. The condenser sits in front of the radiator and dissipates the latent heat absorbed by refrigerant in the evaporator, transitioning the high-pressure vapor back to liquid for the next cycle. The included receiver-drier captures any residual moisture in the refrigerant circuit and provides a service reservoir that smooths flow to the expansion valve. Owners reach for this part when A/C performance falls off, when scan data shows high-side pressure abnormalities, when a stone strike or front collision punctures a tube or fin pack, or when a system flush diagnosis reveals contamination that requires full condenser and drier replacement. The genuine Ford condenser arrives with the correct port locations, internal channel sizing for the U625 platform's refrigerant flow, and the factory-spec receiver-drier desiccant bag sized to the system volume. Always evacuate the refrigerant with EPA-certified recovery equipment before opening the system, replace the o-rings at the line fittings with fresh PAG-oil-lubricated seals, and pull a deep vacuum on the system per Ford specification before recharging. Use only the refrigerant type and oil call-out listed on the underhood label to avoid compressor damage and verify cooling performance with manifold gauges and a vent temperature reading after charging.

• Replaces:

  l1mz19712a, l1mz19712ad, yj718, yj741

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov