Details

• Brand:

  

  

• SKU:

  EB3Z-2C150-C

• Positions: Rear, Left, Right
• Other Names:

  Mount Kit, Kit Brake Caliper Attachment

• Description:

  This is the genuine Ford caliper mount kit, the guide pin, boot, and bolt hardware set that lets a floating disc brake caliper slide on its bracket so the pads apply and release evenly against the rotor. Cataloged by Ford as a mount kit, it includes the guide pins, protective boots, and bolts needed to service the rear caliper slide mechanism. This part serves 20-23 Transit-150 rear brake applications. Technicians look for this kit during a brake job or when the caliper is sticking, the pads are wearing unevenly, there is brake drag or noise, or the guide pins are seized, dry, or their boots are torn and letting in grit. Because the guide pins slide within their bores every time the brakes are applied and their boots keep out water and debris, the pins can corrode and seize and the boots can crack over time, which causes uneven pad wear and caliper drag, a common brake complaint. Seized guide pins reduce braking performance and shorten pad life. Installing the correct genuine kit restores free caliper slide and even pad contact with fresh, sealed hardware. As an original Ford component it matches the caliper bracket bores, pin diameter, and boot geometry exactly so the caliper floats correctly. Confirm the axle position and caliper type against your original before ordering, and lubricate the pins with the correct caliper grease during installation.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov