Details

• Brand:

  

  

• SKU:

  L1MZ-9J323-A

• Other Names:

  Tube Assembly

• Description:

  This is a genuine Ford high pressure fuel line tube for 20-24 Explorer, Lincoln Aviator, and Police Interceptor Utility models equipped with the 3.0L twin-turbocharged V6 engine. Ford catalogs the part on ford.com as High Pressure Line Tube 3.0L with the description Fuel Line From HP Pump To Rail. The tube routes pressurized fuel from the engine-driven high pressure fuel pump to the direct injection fuel rail, where it is metered out to each injector at the precise pressure the powertrain control module commands. Symptoms of a failed HP fuel line include a check engine light with rail pressure codes such as P0087, P0088, P008A, or fuel system performance codes, hard starting, no-start conditions, the smell of raw fuel under the hood, visible fuel residue or wet stains along the tube body or at the fittings, and at the worst case external fuel leakage that creates a fire risk. Buyers typically need this line after diagnostic isolates a leak, after a high pressure fuel pump replacement that requires line removal, after fuel rail service, or during a top-end refresh on the 3.0L V6. The OEM Ford line is machined to the correct routing geometry with the high pressure fitting profiles required to seal at full system pressure. The catalog name is Tube and the part may also be referred to as a Fuel Line. Use new sealing washers or single-use fittings where Ford service procedure specifies, torque the fittings to factory value, and check carefully for leaks at engine start before returning the vehicle to service.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov