Details

• Brand:

  

  

• SKU:

  L1MZ-9961710-A

• Positions: Right, Front Right
• Other Names:

  Seat Track, Track Assembly Seat

• Description:

  This is a genuine Ford rear seat frame assembly for 20-24 Explorer and Lincoln Aviator applications. Ford catalogs the part as a Seat Frame; on dealer sites the assembly is also referenced as a Frame Assembly or Seat Track depending on position and trim. The seat frame is the metal structural backbone of the seat that carries the cushion, foam, cover, latch mechanism, and recline or fold hardware, transferring crash loads into the body floor structure through the floor anchor points. Buyers typically need a complete frame assembly after a collision when the original cannot be reused, after corrosion damage at the floor pan area, after damage from a stuck or broken fold mechanism that cannot be field repaired, or as part of a salvage rebuild where the original frame is missing. The OEM Ford frame is stamped and welded to the factory specification, with the correct anchor points and hardware bosses to accept the cushion, cover, and latch components for the host vehicle. The catalog name is Seat Frame. Always reuse the factory anchor hardware where torque values are specified and replace single-use crash hardware as called out in Ford service procedure. Verify all bolts seat fully against the floor pan reinforcement, recheck cushion alignment, and confirm seatbelt mounting clearance after installation.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov