Details

• Brand:

  

  

• SKU:

  JX6Z-5A215-C

• Positions: Front
• Other Names:

  Clamp Exhaust

• Description:

  This is a genuine Ford exhaust converter clamp used on the 1.5L EcoBoost exhaust system for 20-25 Bronco Sport and Escape applications, with an additional European usage on the 1.0L EcoBoost Fiesta and Focus exhaust where the equivalent JX61-9U501-AE cross reference applies. Dealer catalog references identify the part as a band style clamp that seals the joint between the downstream pipe and the catalytic converter housing. Exhaust clamps in this position see thermal cycling between cold soak and full operating temperature on every drive cycle, so the band material and the bolt threads are specified to resist seizure and the gradual loss of clamp load that affects lower grade hardware. Replacement is typically required after a catalyst service event, an oxygen sensor swap that disturbs the joint, or when the original clamp has been damaged during a prior repair. Always install a fresh clamp at any joint that has been opened, and torque to the Ford specification to maintain the gas tight seal needed for accurate downstream oxygen sensor readings.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov