Details

• Brand:

  

  

• SKU:

  LJ6Z-7823552-B

• Positions: Front, Left, Right
• Other Names:

  Check Assembly Door

• Description:

  This genuine Ford door check arm, LJ6Z-7823552-B, is the pivoting steel restraint that controls how far the front door swings open and holds it at detent positions on 2020-2025 Ford Escape models. The check arm pivots on a hinge pin inside the door structure and rides against a roller or friction pad on the body pillar, giving the door its distinct open-stop positions and preventing it from swinging too far and striking an adjacent vehicle, wall, or curb. A worn or failing check arm typically produces a door that swings freely with no resistance or detent feel, a loud clunk or pop when opening or closing the door, a door that will not hold open on a slope, or visible looseness and play when the door is pushed open by hand. Corrosion at the pivot points and wear of the internal detent surfaces are the common causes of this failure over time, and a broken check arm can also allow the door hinge and body panel to take impact damage that would otherwise be absorbed by the check mechanism. Ford's catalog lists this part as the Check Arm, also called the Door Check Assembly, and it is a direct correlate to the factory door-restraint hardware installed at the assembly plant. Replacement requires removing the interior door trim panel for access, drilling or unbolting the factory retaining rivets or bolts, and securing the new check arm with the specified hardware and torque. Confirm the door still opens and closes smoothly through its full range of detent positions after installation and that no interior trim clips were damaged during removal. This is a direct-fit replacement for the original equipment door check arm on qualifying Escape models.

• Replaces:

  LJ6Z7823552A

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov