Details

• Brand:

  

  

• SKU:

  LX6Z-18124-EP

• Positions: Left
• Other Names:

  Strut, Shock Absorber Assembly Front

• Description:

  This is a genuine Ford front strut, or front shock absorber assembly, for the driver (left-hand) side of the 2020-2025 Ford Escape, covering the 1.5L EcoBoost three-cylinder, 2.0L EcoBoost four-cylinder, 2.5L full hybrid, and 2.5L plug-in hybrid builds. The strut combines the damper and spring seat into the front corner of the suspension, controlling wheel motion, supporting ride height, and keeping the tire planted for predictable steering and braking. A driver shopping for this part is usually dealing with a bouncy or floaty ride, nose dive under braking, a knocking or clunking noise over bumps, uneven or cupped front tire wear, or visible oil weeping from a worn or leaking strut body. Because the 18124 strut family uses multiple suffixes tied to specific suspension, damping, and build configurations, confirm this exact number matches the vehicle's build rather than assuming a sibling suffix will interchange. Ford specifies that the related strut mounting hardware, including the lower bolt and nut and the upper mount nuts, are single-use torque-to-yield fasteners that must be replaced and not reused once loosened. Replace struts as a left-and-right pair whenever possible so both corners deliver matched damping, and have the front alignment checked after installation to protect the new tires.

• Notes: Part has related components that cannot be reused/reinstalled. lower bolt, nut, bolt and top nut.
• Replaces:

  ASH866096, ASH866281, LX6Z18124AA, LX6Z18124DR, LX6Z18124DW, LX6Z18124EL

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov