Details

• Brand:

  

  

• SKU:

  L1MZ-8501-D

• Other Names:

  Engine Water Pump, Water Pump, Pump Assembly Water, pw674

• Description:

  This is a genuine Ford engine water pump assembly for 20-25 Explorer and Police Interceptor Utility models equipped with the 3.3L hybrid or 3.3L gas V6 engine. The water pump circulates coolant through the engine block, cylinder heads, heater core, and radiator to keep operating temperatures within the design window. The pump impeller is driven from the accessory belt, the timing chain area, or an integral cartridge depending on engine architecture, and the assembly arrives with the housing, bearing, seal, and impeller built as a unit. Symptoms of a failed water pump include coolant leaking from the weep hole behind the pulley, a wet streak running down the front of the block, a chirp or growl that changes with engine speed, overheating during hill climbs or extended idle, low coolant warning, and steam from under the hood after shutdown. Buyers typically need this pump after a leak is confirmed, after a noise diagnosis points to the pump bearing, or as part of a preventive service during a timing chain job or major cooling system overhaul. This is the OEM Ford part with the correct impeller geometry and pulley mounting for the 3.3L engine. The catalog name is Water Pump Assembly. Replace the thermostat, hoses, and any single-use fasteners at the same service, refill with the specified coolant, and pressure test before returning the vehicle to service.

• Applications: 3.3L Gas. 3.3L Hybrid.
• Replaces:

  l1mz8501b, pw623

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov