Details

• Brand:

  

  

• SKU:

  L1MZ-5K291-M

• Positions: Left Rear
• Other Names:

  Exhaust System Hanger Bracket, Bracket Exhaust Pipe Mounting

• Description:

  This is a genuine Ford left rear exhaust system hanger bracket, also referred to as the exhaust pipe mounting bracket, the current service replacement that supersedes L1MZ-5K291-E in the same family. Fitment covers 20-25 Explorer builds and the part is normally supplied with the muffler and exhaust pipe assembly, with the standalone listing available when a corroded or impact-damaged bracket needs to be replaced without renewing the full exhaust section. The bracket carries the rubber isolators that support the rear of the exhaust system at the body floor pan, keeping the pipe and muffler at the correct distance from the chassis through full thermal expansion and suspension travel. Technicians reach for this bracket when corrosion at the body mount stud has separated the bracket from the floor, when a curb strike or off-road encounter has bent or torn the bracket, when the rubber isolators have failed and the bracket pivots, or during a major exhaust service where renewing the hanger is more economical than salvaging the original. Install with fresh isolators if the rubber shows compression or cracking, torque the body-side mounting hardware to specification, and confirm the exhaust hangs at the engineered distance from the heat shield and chassis to avoid rattle and heat transfer complaints. Verify that the right-side bracket and any intermediate hangers along the system also remain serviceable, since asymmetric hanger condition leads to misalignment and pipe rub.

• Notes: Included with muffler and pipe.
• Replaces:

  L1MZ5K291E

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov