Details

• Brand:

  

  

• SKU:

  L1MZ-6758-F

• Other Names:

  Tube, Tube Assembly

• Description:

  This is a genuine Ford crankcase ventilation tube assembly for 20-25 Explorer models. Ford catalogs the part as a Tube Assembly without sensor; other common names for the same part include PCV Hose, PCV Valve Hose, EGR Tube, and Crankcase Breather Hose. The tube routes blow-by gases from the engine crankcase into the intake tract so they are burned in the combustion chambers rather than vented to the atmosphere, which is required to meet emissions standards and to keep oil mist out of the engine bay. Symptoms of a failed PCV tube include a check engine light, lean codes, rough idle, whistling under acceleration, oil consumption, sludge build-up around the intake, or visible cracking and oil weeping at the connectors. The molded plastic and rubber assembly is exposed to heat, oil vapor, and engine vibration, and over time the plastic becomes brittle and snaps at the joints or at the quick-connect ends. This is the OEM part with the correct routing geometry, internal restriction, and connector profiles to mate properly with the intake manifold and the cam cover ports. The catalog name is Tube Assy without sensor. Inspect both quick connects for damage during installation, replace any single-use O-rings or clips, and verify the tube routes without contact against hot exhaust components before starting the engine.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov