Details

• Brand:

  

  

• SKU:

  LB5Z-14D696-M

• Positions: Front
• Other Names:

  Element Assembly Heating

• Description:

  This genuine Ford Element Assembly Heating is the front seat cushion heater element for the 2020 through 2025 Ford Explorer and Police Interceptor Utility, specified for seats without the ventilated cooling option. It is the resistive heating pad bonded into the lower seat cushion foam that warms the seat bottom when the heated seat function is switched on. Buyers come to this part when a front seat no longer heats on the cushion, when the seat heats unevenly or only on the backrest, or when a heated seat fault or open circuit has been diagnosed to the cushion element. With the heater switched to high, a healthy element should begin warming within roughly thirty seconds; a cold cushion with normal switch and module operation typically indicates an open element wire inside the pad. The element is bonded into the foam and is not field repairable, so service requires removing the seat and peeling back the trim cover to replace the pad. This is the correct original Ford element for the front cushion on non vented seats; the seat back and ventilated seat versions use different part numbers. Confirm your seat is heated but not cooled, and match the front cushion application for your 2020 to 2025 Explorer or Police Interceptor Utility before installing.

• Replaces:

  LB5Z14D696H

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov