Details

• Brand:

  

  

• SKU:

  LX6Z-4B496-B

• Other Names:

  Bolt

• Description:

  This is the genuine Ford rear drive shaft bolt for 20-25 Ford vehicles. The Ford catalog name is Drive Shaft Bolt. The bolt is an M8 x 1.25 threaded fastener with integral washer, used at the rear drive shaft flange connection on AWD vehicles in the C2 platform family. Per Ford service policy, drive shaft bolts are typically one-time-use fasteners and new bolts must be installed during any service that disturbs the original bolts to ensure correct clamp load and prevent loosening from vibration. Buyers searching for this part are typically completing a rear drive shaft service (replacing the shaft for vibration, U-joint failure, or boot damage), addressing a driveline noise traced to a loose or failed bolt at the rear shaft connection, or completing a comprehensive AWD driveline service where new bolts are required as part of best practice. The bolt installs at the rear drive shaft flange connection with the Ford-specified torque value and the correct tightening sequence; the M8 x 1.25 thread pitch must be matched to avoid stripping the threaded mating component. order the amount needed for the application (typically four to six bolts per drive shaft connection). The LX6Z-4B496-B variant differs from the LX6Z-4B496-A variant in length or position; verify the specific application before ordering.

• Notes: Included with drive shaft. Part cannot be reused/reinstalled.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov