Details

• Brand:

  

  

• SKU:

  L1MZ-6020-B

• Positions: Rear, Lower, Front
• Other Names:

  Front Cover Gasket, Gasket

• Description:

  This genuine Ford engine front cover gasket (part number L1MZ-6020-B) is a round lower gasket for the 3.0 liter EcoBoost V6 engine used in 20-26 Ford Explorer, Lincoln Aviator, and Ford Police Interceptor Utility models. The dealer catalog lists this as a front cover gasket and timing cover gasket with positions rear, lower, and front depending on application; the description identifies it as the round lower gasket for the cylinder head side of the timing cover on the 3.0L engine. It is noted as included with the timing cover when that assembly is supplied as a service kit. The 3.0L Nano V6 engine uses a multi-piece front cover that interfaces with the cylinder block, both cylinder heads, and the oil pan, and the various joints between these surfaces each use a dedicated gasket. This particular L1MZ-6020-B is the round profile gasket located at the lower portion of the cylinder head to timing cover interface. The gasket maintains the oil pressure path between the cylinder head oil galleries and the front cover and prevents external seepage at the lower head-to-cover joint. Use it whenever the timing cover is removed for front oil pump service, wet belt service, front crankshaft seal service, or cylinder head service. Always replace as a one-time-use gasket; the elastomer carrier in the gasket takes a permanent set once it has been clamped, and reuse will lead to weeping at the joint. Clean both sealing surfaces with a non-residue solvent before installation, do not use additional sealer unless the service procedure calls for an RTV bead at a transition point, and torque the cover fasteners in the published sequence.

• Notes: Included with timing cover.
• Applications: 3.0L.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov