Details

• Brand:

  

  

• SKU:

  LC3Z-12A650-CANP

• Other Names:

  Module Engine Control Eec

• Description:

  This genuine Ford engine control module is the EEC powertrain computer that manages the gasoline V8 in the 2021 Ford E-350 Super Duty, governing fuel injection, ignition timing, electronic throttle, idle, and emissions functions from the engine and vehicle sensor inputs. When this module fails, symptoms can include a no-start or hard-start condition, random stalling, a check engine light with powertrain or internal module fault codes, poor drivability, or a loss of communication with a scan tool. This is an NP new-program service module: it is supplied without the vehicle calibration loaded, so it must be programmed to the specific vehicle identification number and correct calibration by a Ford dealer or with Ford diagnostic software before the engine will run. Order by matching the original module catch code and vehicle build so the correct strategy loads, and be aware that a core charge applies and is credited when the original unit is returned. Because the module directly controls fueling and ignition, only a correct genuine Ford unit should be used, and battery power should be disconnected during replacement to protect the electronics. After installation the dealer programming step also relearns idle and adaptive fuel trims so the engine runs correctly. Ford catalog description: Module, Engine Control, EEC, part number LC3Z-12A650-CANP.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov