Details

• Brand:

  

  

• SKU:

  L1MZ-9B325-A

• Other Names:

  Purge Valve, Bracket Fuel Tube Support

• Description:

  This is a genuine Ford evaporative emissions purge valve solenoid for 21-23 F-150 applications. Ford catalogs the part as a Purge Solenoid. The solenoid is a normally-closed electrically operated valve in the EVAP system that opens on command from the powertrain control module to draw stored fuel vapor from the charcoal canister into the engine intake, where the vapor is burned during combustion. Symptoms of a failed purge solenoid include a check engine light with EVAP-related codes such as P0441, P0443, P0455, or P0496, a rough or unstable idle after refueling, the smell of raw fuel near the charcoal canister, fuel filler issues with the cap clicking or releasing pressure, and in some cases hard starting. Buyers typically need this solenoid after diagnostic testing isolates a stuck-open or stuck-closed valve, after the solenoid coil opens electrically, or after physical damage from a road hazard. The OEM Ford part has the correct connector pinout, flow rate, response characteristic, and mounting tabs for the host vehicle. The catalog name is Purge Solenoid; the part may also appear under bracket fuel tube support catalog headings on some dealer sites. Replace the seal at the connector if disturbed, route the harness clear of hot exhaust components, and clear codes and verify EVAP system seal with a smoke test after installation.

• Notes: Includes Fuel Tube Support Bracket.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov