Details

• Brand:

  

  

• SKU:

  ML3Z-2552-A

• Positions: Right, Rear Right Right
• Other Names:

  Caliper, Kit Brake Caliper Attachment

• Description:

  This Genuine Ford ML3Z-2552-A is the right-hand medium-duty front brake caliper assembly for 21-23 F-150 trucks without Police or SSV packages running the 336mm rotor. It supersedes ML3Z-2386-B and ML3Z-2386-J on updated builds. The caliper ships fully assembled with piston, dust boot, bleeder screw, and slider hardware so it bolts directly to the steering knuckle, and the kit category also covers the attachment bracket and shim hardware needed for a complete corner service. core charge applies and the original caliper must be returned to recoup the core deposit. Owners replace this caliper when a stuck piston causes a pulling brake or hot wheel after a drive cycle, when the dust boot tears and contaminates the piston seal with road grit, when the bleeder screw seizes and shears off during a fluid service, or when corrosion eats through the slider pin bores. Always replace front calipers as a pair to maintain even brake balance and pedal feel. Install requires fresh DOT 4 fluid and a full corner bleed before the truck returns to service. Confirm fitment by VIN since Raptor trims and Police Interceptor variants use a different caliper family.

• Notes: Part has related component that cannot be reused/reinstalled. mount bolt.
• Replaces:

  ml3z2386b, ml3z2386j

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov