Details

• Brand:

  

  

• SKU:

  W718804-S450B

• Positions: Left Upper, Right Upper
• Other Names:

  Roof Bow Bolt, Inter-Cooler Pipe Bolt, Upper Duct Bolt, Engine Air Intake Hose Bolt, Air Inlet Bolt, Bolt And Washer Assembly Hex.Head

• Description:

  This is a genuine Ford hex head bolt and washer, an M6 x 23MM fastener catalogued for the engine air intake hose of the Bronco with the 2.3L and 2.7L engines across the 21-25 window, and also used on the Bronco removable-top bracket hardware. It is the threaded fastener that secures the air intake hose clamp, bracket, or duct to its mounting point, holding the intake tract steady so the connections stay sealed and the hose does not shift or vibrate against surrounding components. The integral washer under the head spreads the clamp load so the bolt seats evenly against the bracket or duct flange. Owners reach for this bolt when the original has been lost or damaged during air intake or filter service, when corrosion has weakened the old fastener, or when an intake duct or bracket is being reinstalled and fresh hardware is wanted to restore the factory hold. Manufactured to Ford specifications, it matches the original M6 thread, length, and washer so it installs in the original location without modification. Always confirm the threaded boss is clean and undamaged before installation, start the bolt square to avoid cross-threading, and tighten to the value listed in the applicable air intake service section so the duct or bracket is held securely without crushing the plastic. Inspect the intake hose, clamp, and mounting tab for cracks or fatigue while the fastener is out, since a loose intake connection can draw unmetered air.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov