Details

• Brand:

  

  

• SKU:

  MB3Z-2C190-H

• Positions: Rear, Left Rear, Right Rear
• Other Names:

  Rear Speed Sensor, ABS Wheel Speed Sensor, Sensor Assembly

• Description:

  This is the genuine Ford ABS wheel speed sensor with integrated wire harness for the 21-25 Bronco and Ranger, fitted at a rear wheel position. The sensor reads the tone ring at the hub and reports wheel speed to the ABS and stability control modules, which rely on the signal for anti-lock braking, traction control, and electronic stability. Owners replace this sensor when the ABS, traction, or stability warning lights illuminate, when a wheel-speed fault code is stored, or when the harness is cut, corroded, or damaged by road debris. A failed sensor disables anti-lock function at that wheel and can cause erratic brake or stability behavior. This variant serves the left or right rear position and supersedes earlier suffixes in the family. Built to original specifications, the sensor and connector match the factory mounting and pinout for a direct fit. Confirm your application and wheel position before ordering. As an OEM Motorcraft-quality component, it provides the correct air gap and signal output the control modules expect. Clean the mounting bore and tone ring, seat the sensor fully, route the harness along the factory path, and clear stored codes after installation to confirm the fault has cleared.

• Replaces:

  mb3z2c190a, mb3z2c190b

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov