Details

• Brand:

  

  

• SKU:

  ML3Z-2282-U

• Positions: Left
• Other Names:

  Flex Hose, Hose Assembly Brake

• Description:

  This Genuine Ford ML3Z-2282-U is the left-hand front brake hydraulic hose for 21-25 F-150 trucks built at the Dearborn assembly plant with single exhaust and without the Raptor or Tremor packages. The hose carries pressurized brake fluid from the chassis-mounted hard line to the front caliper across the full range of suspension travel and steering input, and the routing geometry is specific to the Dearborn build configuration with its particular brake-line bracketry. It supersedes earlier ML3Z-2282-D and ML3Z-2282-K suffixes. Owners replace this part when the rubber sheath cracks or weeps after age and ozone exposure, when the inner liner balloons under brake pressure causing soft pedal or pulling under hard stops, when the crimp ferrule corrodes after road-salt exposure, or when a brake hose failure during a state inspection triggers replacement. Always replace both sides as a pair to maintain even brake balance. Installation requires a fresh fluid bleed of the affected corner along with a careful inspection of the steering-knuckle bracket to confirm the hose routing does not contact the tire at full lock. Confirm assembly plant and exhaust configuration by VIN before ordering since the Kansas City plant and Raptor/Tremor variants use a different hose number.

• Replaces:

  ml3z2282d, ml3z2282k

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov