Details

• Brand:

  

  

• SKU:

  ML3Z-2K005-D

• Positions: Front Left, Left
• Other Names:

  Splash Shield, Shield Splash

• Description:

  This is a genuine Ford front brake splash shield, also called a brake dust shield, for the left-hand driver side of the 2021 through 2025 F-150. The shield mounts behind the front rotor and knuckle to keep water, mud, road salt, and debris off the braking surface and away from the caliper and pads, protecting front stopping performance and rotor life. Ford catalogs this component as a Splash Shield. Owners search for this part when the factory stamped shield has rusted, cracked, or been bent into the rotor during a brake service, which shows up as a steady scraping, grinding, or ringing noise from the front corner that changes with wheel speed, or when corrosion is spraying grit onto the rotor and chewing up pads. Installing the correct shield stops that contact noise and restores the original barrier that keeps the front brakes clean. This is the driver-side front shield; the passenger-side piece is a separate mirror-image part. Ford forms the shield to the factory contour so it clears the rotor, hub, and steering knuckle without trimming or bending. The job is done with the caliper and rotor off, so it pairs naturally with a front rotor, pad, or wheel-bearing service. Inspect the mounting tabs, seat the shield flat, and torque the retaining hardware to Ford specification so it does not rub the rotor. Confirm your front brake setup, then fit this as the correct driver-side front splash shield for the fourteenth-generation F-150.

• Replaces:

  ml3z2k005b

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov