Details

• Brand:

  

  

• SKU:

  ML3Z-2282-T

• Positions: Right, Rear Right Right
• Other Names:

  Flex Hose, Hose Assembly Brake

• Description:

  This genuine Ford brake hydraulic hose carries pressurized fluid from the rigid body line to the moving rear caliper on the passenger side of the 21-25 F-150, flexing with suspension travel while withstanding full system pressure. Cataloged by Ford as a brake hose, it routes fluid to the right rear corner so the wheel brakes apply firmly and release cleanly. A deteriorating hose can swell internally, crack on the outer jacket, weep at a crimped fitting, or balloon under pressure, producing a soft or sinking pedal, uneven braking, a slow caliper release, or a visible fluid leak that fails inspection. Because braking is safety-critical, a hose showing age cracking or bulging should be replaced rather than patched. This replacement matches the original length, end-fitting types and routing so it installs without modification. After fitting, the hydraulic system must be bled to factory procedure to remove trapped air and restore a firm pedal. Installing the correct Ford-engineered hose preserves proper pressure delivery and corrosion-resistant fittings, returning consistent stopping performance to the right rear brake.

• Replaces:

  ml3z2282c, ml3z2282g

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov