Details

• Brand:

  

  

• SKU:

  ML3Z-17603-A

• Other Names:

  Kit Jet

• Description:

  This genuine Ford component is the windshield washer spray jet, listed in the Ford catalog as a spray jet or washer nozzle kit for the 2021-2025 F-150. The jet snaps into the hood panel and receives pressurized washer fluid from the reservoir pump through the supply hose, then atomizes and aims that fluid across the windshield so the wiper blades can clear road film, salt spray, bug residue and winter grime. Because the outlet orifices are extremely small, they are the first restriction in the washer circuit to plug with wax, dirt or hard-water deposits. Owners searching for this jet typically report weak or misdirected spray, fluid shooting over the roof or landing on the hood instead of the glass, one side of the windshield being wet while the other stays dry, dribbling after the washer switch is released, or a cracked nozzle body that leaks around the hose barb. A jet knocked out of aim during hood or front-end repair also needs replacement. Fitment is keyed to the fourteenth-generation aluminum-body F-150, so confirm the hood configuration and washer plumbing against the build before installing. After fitting, cycle the washer until fluid reaches the nozzle to purge air from the line, verify the hose is fully seated on the barb so no fluid is lost under the hood, and confirm the spray pattern lands in the wiper sweep area. Installing the correct Ford jet restores the factory spray geometry and coverage.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov