Details

• Brand:

  

  

• SKU:

  PC3Z-14C022-B

• Positions: Outer
• Other Names:

  Bracket

• Description:

  This is a genuine Ford radar mount bracket for the 23-25 Super Duty, the bracket that supports the adaptive cruise control distance sensor at the front of the truck and holds it at the correct aim for the forward radar system. The bracket fixes the radar module at the factory angle behind the grille or bumper so the sensor can measure the distance and speed of traffic ahead for adaptive cruise control and forward collision warning. Since these features depend on the sensor sitting in the exact position, a bent, cracked, or mislocated bracket can produce faults, dropouts, or inaccurate readings. Owners replace this bracket after front-end collision or bumper work, when the radar will not seat or hold its aim, when driver assistance features set faults, or when the original was damaged during service. The 14C022 base is shared across several Ford applications as a mount bracket with different prefixes and suffixes, so confirm the model and sensor variant match your truck before ordering. Built to Ford specifications, the bracket provides the correct mounting geometry and fastener locations to install the radar at the factory position without modification. Verify the fit, transfer the sensor and any hardware, seat the bracket fully, and have the radar alignment and system function verified after installation so the adaptive cruise and warning systems operate as designed.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov