Details

• Brand:

  

  

• SKU:

  PC3Z-15A862-B

• Positions: Right Outer, Front Right Outer Outer
• Other Names:

  Parking Aid Sensor Seal, Parking Aid Sensor Retaining Ring, Retainer

• Description:

  This is a genuine Ford park sensor retainer for the 23-25 Super Duty, the bracket that secures a parking aid sensor within the bumper so the ultrasonic sensor sits flush and aimed at the correct angle. The retainer clips into the bumper cover and holds the park-assist sensor in its factory position, which the parking aid system depends on to measure distance to obstacles and alert the driver during low-speed maneuvers. When the retainer is cracked or missing, the sensor can sit loose or off-angle, producing inaccurate distance readings, false warnings, or system faults. Owners replace this retainer when it is broken at a clip, when a sensor will not stay seated, after bumper repair or repaint, or when it was damaged while removing the bumper or sensors. Because retainers differ by sensor position and bumper layout, the 15A862 base appears with several suffixes, so confirm the position and sensor type match your truck before ordering. Built to Ford specifications, the retainer provides the correct geometry and clip locations to hold the sensor at the factory position without modification. Verify the fit, seat the retainer into the bumper cover, install the sensor so it locks flush and aimed, and confirm the parking aid system works correctly afterward. Installing the correct retainer restores proper sensor aim and dependable parking assistance.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov