Details

• Brand:

  

  

• SKU:

  W716511-S437

• Other Names:

  Bolt

• Description:

  This Genuine Ford engine oil pan bolt fastens the oil pan to the cylinder block on the 24-25 Ford F-150 equipped with the 5.2L supercharged V8, the high-output Raptor R engine. It is one of the perimeter bolts that clamp the oil pan flange against the block, compressing the sealing bead so the pan holds its charge of engine oil without seeping at the joint. Because the oil pan carries the engine's full oil supply, a bolt that is missing, stripped, or under-torqued can let oil weep or drip from the pan rail, leave spots under the truck, and in severe cases allow air to be drawn past the seal, so a clean, evenly torqued group of bolts is part of any pan reseal or pan replacement. This part number supersedes the earlier W713391-S437 and reflects the current Ford specification for the application. When resealing or reinstalling the pan, replace any bolt that shows damaged threads or a distorted head, run all bolts down finger-tight first, then tighten to the torque value and crossing sequence in the appropriate Ford workshop manual so the pan flange pulls down evenly and the seal seats without distortion. As a factory Ford fastener it matches the original thread size, length, and head style, so it threads cleanly into the block and accepts the specified clamp load without the fit or strength compromises common to generic hardware. It is supplied as an individual bolt; confirm the amount your repair requires before ordering, since a full pan job uses the complete perimeter set.

• Replaces:

  W713391S437

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov